在家庭裝修或各類建筑裝飾工程中，墻面處理是極為關鍵的環節，而膩子粉作為墻面基層處理的重要材料，其調配方式直接關乎最終的施工效果與質量。其中，在用膩子粉時是加膠水還是加水，常常讓施工人員和業主感到困惑。實際上，這一選擇并非隨意為之，而是要依據多種因素綜合考量。?

In home decoration or various building decoration projects, wall treatment is a crucial step, and putty powder, as an important material for wall base treatment, its mixing method directly affects the final construction effect and quality. Among them, whether to add glue or water when using putty powder often confuses construction workers and owners. In fact, this choice is not arbitrary, but needs to be comprehensively considered based on multiple factors. ?

傳統膩子粉調配：加膠水的情況?

Traditional putty powder mixing: adding glue

在過去較長一段時間，傳統的普通膩子粉在施工時，常需添加膠水來增強其性能。普通膩子粉主要由碳酸鈣、滑石粉等填料以及少量添加劑組成，本身粘結強度相對較低。添加膠水，如常見的 108 膠水（聚乙烯醇縮甲醛膠），能夠顯著提升膩子粉的粘結力，使其更好地附著在墻面基層上，減少脫落風險。在一些老舊房屋的墻面翻新中，由于墻面基層可能存在粉化、疏松等問題，加膠水后的膩子能更好地與基層結合，起到加固和修復的作用。?

For a long time in the past, traditional ordinary putty powder often required the addition of glue to enhance its performance during construction. Ordinary putty powder is mainly composed of fillers such as calcium carbonate and talc powder, as well as a small amount of additives, and its bonding strength is relatively low. Adding glue, such as the common 108 glue (polyvinyl formal glue), can significantly improve the adhesion of putty powder, making it better adhere to the wall substrate and reducing the risk of detachment. In the wall renovation of some old houses, due to the possible problems of powdering and looseness in the wall base layer, the putty added with glue can better bond with the base layer, playing a role in reinforcement and repair. ?

從施工工藝角度來看，加膠水調配的膩子粉在批刮時，具有更好的操作性和可塑性。它能夠讓膩子在墻面均勻分布，且在一定程度上減少流墜現象，便于施工人員將膩子刮平、刮薄，從而達到理想的平整度。對于一些需要進行大面積墻面找平的工程，這種調配方式能提高施工效率和質量。?

From the perspective of construction technology, putty powder mixed with glue has better operability and plasticity during scraping. It can evenly distribute putty on the wall and reduce the phenomenon of sagging to a certain extent, making it easier for construction personnel to smooth and thin the putty, thus achieving the desired flatness. For some projects that require large-scale wall leveling, this allocation method can improve construction efficiency and quality. ?

然而，加膠水的做法并非毫無弊端。傳統膠水多含有甲醛等揮發性有機化合物（VOC），在施工過程中和日后使用中，會逐漸釋放到空氣中，對室內環境造成污染，危害居住者的身體健康。隨著人們環保意識的增強以及對室內空氣質量要求的提高，這種加膠水調配膩子粉的方式正逐漸受到限制。許多地區已經明確規定，在室內裝修中禁止使用含有害物質的膠水與膩子粉混合。?

However, the method of adding glue is not without its drawbacks. Traditional adhesives often contain volatile organic compounds (VOCs) such as formaldehyde, which are gradually released into the air during construction and future use, causing pollution to indoor environments and endangering the health of residents. With the increasing awareness of environmental protection and the growing demand for indoor air quality, this method of adding glue to mix putty powder is gradually being restricted. Many regions have clearly stipulated that the use of adhesives containing harmful substances mixed with putty powder is prohibited in indoor decoration. ?

現代膩子粉調配：加水即可?

Modern putty powder mixing: just add water

隨著材料科學的發展，如今市面上出現了大量性能優良的成品膩子粉，如耐水膩子粉、環保膩子粉等，這些產品在調配時通常只需加水。以耐水膩子粉為例，其配方中添加了可再分散乳膠粉、纖維素醚等高分子聚合物，這些成分在遇水后能夠形成具有良好粘結性能和耐水性能的網絡結構，無需額外添加膠水就能滿足墻面施工的各項要求。?

With the development of materials science, there are now a large number of high-performance finished putty powders on the market, such as water-resistant putty powder, environmentally friendly putty powder, etc. These products usually only need to be mixed with water. Taking water-resistant putty powder as an example, its formula contains high molecular weight polymers such as redispersible latex powder and cellulose ether. These components can form a network structure with good adhesion and water resistance when in contact with water, and can meet various requirements for wall construction without the need for additional glue. ?

耐水膩子粉加水調配后，在施工性能上并不遜色于加膠水的傳統膩子。它具有良好的和易性，易于攪拌均勻，且在批刮過程中能夠輕松涂抹在墻面上，同時保持較好的附著力和抗流掛性。加水調配的耐水膩子粉干燥后，形成的膩子層硬度高、耐水性強，能夠有效抵御潮濕環境對墻面的侵蝕，減少因水分滲透導致的膩子粉脫落、發霉等問題。?

After mixing water-resistant putty powder with water, its construction performance is not inferior to traditional putty with glue. It has good workability, easy to mix evenly, and can be easily applied to the wall during the scraping process, while maintaining good adhesion and anti sagging properties. After the water-resistant putty powder mixed with water is dried, the formed putty layer has high hardness and strong water resistance, which can effectively resist the erosion of damp environment on the wall, reduce the problems of putty powder falling off and mold caused by water infiltration. ?

在環保方面，加水調配的成品膩子粉優勢明顯。由于不添加含有害物質的膠水，從源頭上降低了室內空氣污染的風險，符合綠色環保的裝修理念。這對于家庭裝修，尤其是有老人、兒童、孕婦等對空氣質量敏感人群的居住環境來說，至關重要。許多高端住宅和對室內環境要求嚴格的場所，如醫院、學校等，都優先選擇加水調配的環保型膩子粉。?

In terms of environmental protection, the finished putty powder mixed with water has obvious advantages. Due to the absence of adhesives containing harmful substances, the risk of indoor air pollution is reduced from the source, which is in line with the concept of green and environmentally friendly decoration. This is crucial for home decoration, especially for living environments that are sensitive to air quality, such as the elderly, children, pregnant women, etc. Many high-end residential buildings and places with strict indoor environmental requirements, such as hospitals, schools, etc., prioritize the use of environmentally friendly putty powder mixed with water. ?

特殊情況與應對策略?

Special circumstances and coping strategies

盡管現代成品膩子粉加水調配已成為主流，但在某些特殊情況下，仍可能需要對調配方式進行調整。當墻面基層吸水性極強，如一些未經處理的新砌磚墻，即使使用成品膩子粉，也可能出現膩子層水分快速被吸干，導致粘結不牢、開裂等問題。此時，可在施工前對墻面基層進行預處理，如涂刷界面劑或用清水充分潤濕墻面，然后再正常加水調配膩子粉進行施工。若墻面基層狀況極差，存在嚴重的不平整、疏松等問題，單純依靠膩子粉難以達到理想的修復和找平效果。在這種情況下，可能需要先使用水泥砂漿等材料對墻面進行初步修復和找平，然后再用加水調配的膩子粉進行精細處理，以確保墻面的穩定性和美觀度。

Although adding water to modern finished putty powder has become mainstream, in some special cases, adjustments to the mixing method may still be necessary. When the base layer of the wall has strong water absorption, such as some untreated new brick walls, even if finished putty powder is used, the moisture in the putty layer may be quickly absorbed, leading to problems such as weak bonding and cracking. At this point, pre-treatment can be carried out on the wall base before construction, such as applying interface agents or thoroughly wetting the wall with clean water, and then adding water to mix putty powder for construction. If the condition of the wall base is extremely poor, with serious unevenness, looseness and other problems, it is difficult to achieve the ideal repair and leveling effect solely relying on putty powder. In this case, it may be necessary to first use materials such as cement mortar to preliminarily repair and level the wall surface, and then use putty powder mixed with water for fine treatment to ensure the stability and aesthetics of the wall surface.

本文由濟南膩子粉友情奉獻.更多有關的知識請點擊:http://www.laodaohe.cc真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from Jinan gypsum powder For more information, please click: http://www.laodaohe.cc Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.