On the battlefield of construction in Jinan, plastering mortar is like a "beautician" for building walls, which can make rough substrates smooth and even. However, if this capable "assistant" is not stored properly, it will be like spoiled food and lose its original performance. Jinan has distinct four seasons, with hot and rainy summers and cold and dry winters. Faced with such a changing climate, it is crucial to master the "preservation secrets" of plastering mortar. Only through scientific storage can it be kept in good condition at all times and achieve the best results during construction.
The selection of storage environment is the primary key to preserving plaster mortar. Firstly, the storage location must be kept dry to avoid the invasion of humid air. Jinan has more precipitation in summer and high air humidity. If the plastering mortar is placed in a humid environment, the cement and other cementitious materials will absorb moisture and undergo hydration reactions in advance, causing the mortar to clump and harden, making it unable to be used normally. Therefore, the warehouse floor should be treated with moisture-proof measures, such as laying moisture-proof pads or plastic films to separate the mortar from the floor; The wall can also be coated with moisture-proof paint to further isolate moisture. At the same time, the warehouse should have good ventilation conditions, maintain air circulation, and prevent moisture accumulation. In winter, the temperature in Jinan is relatively low, especially at night. The low temperature may cause the moisture in the mortar to freeze, damaging its internal structure and affecting its strength. Therefore, the warehouse needs to take good insulation measures. Insulation materials such as rock wool boards can be covered around the warehouse, and if necessary, heating equipment can be installed inside the warehouse to maintain the temperature within a suitable range and avoid the mortar from freezing.
The integrity of packaging also has a significant impact on the preservation of plastering mortar. Unopened plastering mortar should be stored in its original packaging, and the packaging bag should be kept sealed. High quality packaging materials can effectively block external moisture and air from entering, extending the shelf life of mortar. During the transportation process, handle with care to avoid damage to the packaging bag. Once cracks or holes are found in the packaging, they should be repaired or replaced immediately to prevent the mortar from getting damp. For unused mortar after opening, it is even more important to handle it properly. You can use a sealing clip to clamp the bag opening or transfer it to a sealed container to exhaust the air inside the container as much as possible, reduce the contact area with air, and lower the risk of moisture.
During the storage process, the principle of first in, first out should also be followed. The plaster mortar purchased first should be used first to avoid a decrease in performance due to prolonged storage time. Even under good storage conditions, plastering mortar has a certain shelf life. Generally, dry mixed plastering mortar has a shelf life of about 3-6 months, which should be referred to in the product instructions. Regularly inspect the inventory of plastering mortar to see if there are any abnormal phenomena such as clumping, hardening, discoloration, etc. If a small amount of clumps are found, the clumped parts can be removed by screening, and the remaining un clumped mortar can still be used after passing the inspection; But if the clumping is severe, or there is a noticeable odor, discoloration, etc., it indicates that the mortar has deteriorated and cannot be used for construction again to avoid affecting the quality of the project.
In addition, the storage requirements for different types of plastering mortar also vary slightly. For example, waterproof plastering mortar, insulation plastering mortar, etc. with special functions need to be stored according to their characteristics in addition to following the general preservation methods mentioned above. Waterproof plastering mortar requires higher moisture resistance and should be stored in an environment with lower humidity as much as possible; The insulation plaster mortar should avoid heavy pressure and sharp object collision to prevent damage to its internal insulation structure.
The scientific preservation of Jinan plaster mortar is a game between environment and time. From the careful creation of storage environment, to the proper maintenance of packaging, to the reasonable management during use, every link cannot be ignored. Mastering these "preservation secrets" can make the plastering mortar "online" for a long time, adding bricks and tiles to the construction projects in Jinan, and building strong and beautiful walls.
This article is a friendly contribution from Jinan gypsum powder For more information, please click: http://www.laodaohe.cc Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.